Dust Out. Vinyl In.

Our record storage cube has a unique door that easily slides from open to closed. Show off the spines or keep your cats out.

Free Shipping.

If you live in the lower 48 United States, shipping is on us. Other folks: contact us for a shipping quote. 

Built to last.

We use Baltic Birch plywood to build our vinyl cubes. Google it: it's void free, has 9 plys for maximum stability. This is not the cheap stuff. The joints are glued miters: super crisp edges, continuous grain wrap. We've sold a few thousand of these and have yet to hear of one breaking in use.

No assembly required.

These aren't flat packed. No flimsy hardware, no instructions. See above under built to last.

Stackable.

Feet (if you want them) lock into divots on the top of each cube, like certain interlocking plastic block toy. We recommend 4 cubes high, but again - haven't had a single report of a cube breaking from stacking.

Modular.

Add a new storage cube as your collection grows. Arrange your record storage cubes however works best in your home. Then move to a new place and rearrange. (Oh yeah, you won't have to box up your vinyl, just put the cubes in the van). 

Options.

With 12 door colors, with or without feet, casters, and 2 finish options, your record collection storage can be customized to match your needs.

Made in Ohio.

We're a three person shop in Cincinnati, Ohio. Stop by and say hello. Your purchase supports American manufacturing and your dollars get spent on materials and tools from other local suppliers.

The Details.

Each cube holds approximately 70 lps. The interior dimensions are 13" tall x 12-7/8" deep x 13-1/2" wide, so the storage cubes will almost any box set or sleeve out there. Exterior dimensions are 14-1/4" wide x 14-1/4" tall x 13-3/4" deep. Feet add an extra 3/4" to the height. Casters add 2-1/2" inches to the height.

Dust Out. Vinyl In.

Our record storage cube has a unique door that easily slides from open to closed. Show off the spines or keep your cats out.

Free Shipping.

If you live in the lower 48 United States, shipping is on us. Other folks: contact us for a shipping quote. 

Built to last.

We use Baltic Birch plywood to build our vinyl cubes. Google it: it's void free, has 9 plys for maximum stability. This is not the cheap stuff. The joints are glued miters: super crisp edges, continuous grain wrap. We've sold a few thousand of these and have yet to hear of one breaking in use.

No assembly required.

These aren't flat packed. No flimsy hardware, no instructions. See above under built to last.

Stackable.

Feet (if you want them) lock into divots on the top of each cube, like certain interlocking plastic block toy. We recommend 4 cubes high, but again - haven't had a single report of a cube breaking from stacking.

Modular.

Add a new storage cube as your collection grows. Arrange your record storage cubes however works best in your home. Then move to a new place and rearrange. (Oh yeah, you won't have to box up your vinyl, just put the cubes in the van). 

Options.

With 12 door colors, with or without feet, casters, and 2 finish options, your record collection storage can be customized to match your needs.

Made in Ohio.

We're a three person shop in Cincinnati, Ohio. Stop by and say hello. Your purchase supports American manufacturing and your dollars get spent on materials and tools from other local suppliers.

The Details.

Each cube holds approximately 70 lps. The interior dimensions are 13" tall x 12-7/8" deep x 13-1/2" wide, so the storage cubes will almost any box set or sleeve out there. Exterior dimensions are 14-1/4" wide x 14-1/4" tall x 13-3/4" deep. Feet add an extra 3/4" to the height. Casters add 2-1/2" inches to the height.

This simple design - a single bend - allows you to hang jackets, backpacks, shirts, pants, scarves, anything else you might want, to up 30 pounds. 

Hand polished with a danish oil finish. Comes with your choice of hardware: brass, steel, or black screws & drywall anchors, easy to mount to a door or wall.

Available in Walnut, Maple, Oak, or Ash. Hardware available in black, steel, or brass.

Dimensions: 9/16" wide, 4-1/2" tall, projects from wall 1"

A stripped down to the basics stool: Three legs, three stretchers and a top. Legs & top are attached with a tapered tenon joint that gets tighter as you sit on it, so this stool will last for generations.

Shown in Wormy Maple, Oak, and Walnut. Also available in Soft Maple or Ash.

Dimensions: 18"-30" tall, seat is 12" in diameter.

Our super thin coffee table has edge so thin it almost disappears, but it's surprisingly sturdy.

By tapering the belly of the table top from the joints to the edge, we're able to keep the table strong where it needs to be, but light where it can be. The result is a beautiful, minimal modern table with the thinnest edge possible.

Dimensions: each table's shape will vary slightly, but general dimensions are 48" wide x 18" deep x 16" tall.

Show in Walnut & Oak, but also available in Maple and Ash.

Dust Out. Vinyl In.

Our record storage cube has a unique door that easily slides from open to closed. Show off the spines or keep your cats out.

Free Shipping.

If you live in the lower 48 United States, shipping is on us. Other folks: contact us for a shipping quote. 

Built to last.

We use Baltic Birch plywood to build our vinyl cubes. Google it: it's void free, has 9 plys for maximum stability. This is not the cheap stuff. The joints are glued miters: super crisp edges, continuous grain wrap. We've sold a few thousand of these and have yet to hear of one breaking in use.

No assembly required.

These aren't flat packed. No flimsy hardware, no instructions. See above under built to last.

Stackable.

Feet (if you want them) lock into divots on the top of each cube, like certain interlocking plastic block toy. We recommend 4 cubes high, but again - haven't had a single report of a cube breaking from stacking.

Modular.

Add a new storage cube as your collection grows. Arrange your record storage cubes however works best in your home. Then move to a new place and rearrange. (Oh yeah, you won't have to box up your vinyl, just put the cubes in the van). 

Options.

With 12 door colors, with or without feet, casters, and 2 finish options, your record collection storage can be customized to match your needs.

Made in Ohio.

We're a three person shop in Cincinnati, Ohio. Stop by and say hello. Your purchase supports American manufacturing and your dollars get spent on materials and tools from other local suppliers.

The Details.

Each cube holds approximately 70 lps. The interior dimensions are 13" tall x 12-7/8" deep x 13-1/2" wide, so the storage cubes will almost any box set or sleeve out there. Exterior dimensions are 14-1/4" wide x 14-1/4" tall x 13-3/4" deep. Feet add an extra 3/4" to the height. Casters add 2-1/2" inches to the height.